|
I don't recommend using adhesives on every part of the stairway, but I
do recommend using them to attach your stair treads to the stair
stringers.
As you can see in the picture above, I spread a liberal amount of
construction glue on top of the stairs stringer. You can use as much as
you want to, but there is no need to get carried away.
If you look close enough in the picture above, you will notice that I
glued the quarter round 1 - 1/8 inch piece of plywood down to the
concrete.
I'm not worried about the adhesive separating from the concrete or wood
in the future, because the stair tread and small plywood strips, should
hold everything in place.
|
|
|
