| The Arrow in the picture above is pointing to the top of our riser
height which in this case is 7.3 in decimal form and as a fraction it
would be closest to 7 5/16 inches. This framing square is laid out in
tenths of an inch as you can see the Arrow is pointing to 3/10, on the
other side of the framing square you can see that inches are in
fractions .This picture also shows the stair gauge attached to the
framing square.
Stair Tread Nailing
Stair Wall Furring
Straight Edge Stair Stringers
Stringer to Headout
Stringer Layout at Landing Difference
Stringer to Ledger Nailing
Tiled Stair Risers
Toe Nailing
Where The Stucco Meets The Stairs |
